[TDLyver]

For now, I am working on getting the black one, that is running, to be more road worthy. I want to be able and drive around and enjoy it.

It looks as though some one had taken a bat to each window along the driver's side. Lucky for me, the previous owner had 4 used, replacement sliders for the back windows and a pair of used doors (with better skin and less rust.)

The spare driver's door has glass and just needs seals. I rough fitted it for now (body work later) and got the old windows pulled out of the driver's side. The spares that the previous owner had had much less rust and he also had seal kits for two. I will get the driver's side replaced since that is where the damage was.

The front seat needs to have the bracket welded and the middle seat was found in the white (non-running) burb.

I want to get the glass in and sealed, check brakes, lube the chassis and change oil in the engine, rear end, and the transmission, and check the timing.

After this initial road worthiness. I am going to get in titled for here in Oregon and spend the spring and summer driving it around. While I get to use this one, I will dig into the motor on the white one and see what i am in for.