Re: 3500 front hub info needed
Thomas
Thanks for all the info.
Yes, I was referring to the inner bearing seal. At first it looked like the seal was threaded into the hub and since parts can be a bit hard to find I figured I would ask before I started making assumptions. I think I will try and find new seals before I tap them out though.
The outer bearing are pitted and really need to be replaced so I assume the inner(s) will be the same.
The wheel cylinders and the linings appeared to be in good shape and dry on that side. That really doesn't mean anything though. The brakes on this truck haven't worked since I purchased it in 04. The Hydrovac is seized and there is no fluid moving past it.
At least I can make an attempt to find parts etc and guestimate the cost of the brakes.
|