I ordered and received a replacement vent glass and a roll of glass setting tape for the truck. Took the window crank, inside door handle and door panel off. Then removed the vent window assembly and took the handle off of it. The broken glass and the gasket holding it came out pretty easy. I did not replace the main rubber around the assembly since it was replaced a couple of years ago and was still in ok shape. I cleaned out the glass frame, lubed up the glass tape with dish washing liquid, trimmed it on the bottom corner, taped it to the vent glass and hammered the glass in with a rubber mallet. Trimmed off the excess tape and reinstalled the whole thing. It was not as bad as I expected. Thank you to AZKen for the advice and support!
20151207_101028.jpg
20151208_090924.jpg