Quote:
Originally Posted by Winston
the truck seems to be stuck in 1st gear. I would think it would pull out, but nope. and the clutch sinks to the floor, and doesn't return. Does this sound like fluid (tranny), or a bad clutch?
Thank you again for any help.. I really do appreciate this club!
|
Chances are, your clutch is fine. Most likely you need to replace the master cylinder which is shared by the brakes and the hydraulic clutch. If the clutch still doesn't release after you replace the master cylinder, replace the slave cylinder too. It's mounted down on the bell housing. Both parts should be readily available at a good auto parts store.
Nice looking truck! Good luck getting it roadworthy again! Keep us up to date on your progress.