Re: V6 Magnum Gaskets
Paper gaskets are simple to make with a small ball peen hammer. Copper head gaskets. I drill all the holes on a small drill press. The cylinders. I get to a 1/8 inch using a cutter in a mill. Backing the copper with plywood. Then I glue the copper to the block with hi-tack. Plus a couple of bolts. Then I put the boring bar on the block. And set the cutter to the bore and back it up through the copper. Perfect fit. Then aneall the copper and spray a little copper cost spray. Takes about an hour to make a set.
|