Quote:
Originally Posted by Jmclendon
It is a bit atrocious how dirty they are. I hit them with some air while the old spark plugs were in. But, it clearly didn't do the trick.
What have you used to get yours so clean? I'm super paranoid about letting anything fall through into the chamber.
|
I use an awl, the one you normally would see with a 90° bend on one tip and the other end is straight with the plug install about half way in, and scrap around the plug. Then I use a air nozzle with a long small snout to blow out all loose debris. Then I removed the spark plug and insert a rag large enough to plug the hole and finish cleaning and blowing it off.