Re: Project Blown 305
The 305's are super common down there....so I'd grab a couple blocks and experiment on one with how far you can overbore. I'm speaking from what I have seen more than anything...when I had mine apart with the casting plugs pulled out of the block...it was nothing but huge water jackets between the bore spacing. Thereby somewhat confirming a Huge over bore would either cause premature cylinder failure or you'd hit water real fast. .060 over seems to be the common safe overbore size on most old engines. These things produced pretty decent torque as it is....so a bottom end lightening...more cam....lighter pistons....and some boost will wake them up big time anyhow. If I can't find a 478, eventually I'm planning on rebuilding the 305 somewhat like you are.
__________________
"Excuse the rust I use my truck"
1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
1964 Chevy C20 292/SM420
1966 Chevy C10 292 hotrod 6/TKO600
My youtube channel aka Military Chevy: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|