Quote:
If I'm not mistaken the original shocks came with the stud made on the shocks. When they were replaced the first time you had to installed the studs then the shocks. The problem is that when the studs get installed they did not properly tighten the nuts (due to lack of access to the nut).
|
You're correct on all of this. Did some more research. Original shocks did have the studs built into them. As for changing them....it is extremely difficult to reach the nut. I got the driver's side torqued to 70ish ft-lbs. Passenger side is less than 60 ft-lbs. Both need to be 140 ft-lbs. Very tight working space and I'm pushing the torque wrench above my head.
Not sure how I'm gonna get those torqued to spec.