Tips for removing 305 motor from a 60-61 pickup
Hello folks,
I am ready to remove the 305 V6 from a 60 or 61 GMC 3/4 ton pickup. The motor mount bolts appear to be pretty straight forward, but when I am looking from inside the cab at the manual transmission, I see two upper bolts from the tranny to the clutch bell housing, but nothing visible on the lower section. I know this is a heavy motor, so I figured it would be easier to bolt the tranny for lifting it out. Any tips for making this task simpler, and safer, would be greatly appreciated.
Thanks
Rob Dale
Mustang, OK.
|