There is very little info out there about our trucks and clutches, so I just did mine and this is what I have noticed.
As posted... 12" kit's work. I got this one
https://shop.advanceautoparts.com/p/...62-1/5332559-p
Two things about it you should know:
-Yes, the hub on the disk is on the wrong side. That has to affect the pedal travel?
-The carrier bearing inside the flywheel, it is just a race, it's not an actual bearing, but it's the correct size and will work.
The throw out bearing and pressure plate were correct and matched up with my old stuff.
So I left my carrier bearing and reused the 11" disk because it still looked new. I'm sure the 12" disk would be fine with a new flywheel as well, but I left my original flywheel on it.