Re: It's at the Machine Shop
Great to here, I just finished my 305 and have somethings left from my rebuild.
Machined crank and set of .020/.020 main and rod bearings. Found out my engine was a 1974 305 and took a different main bearing (bigger), so the main bearings are for 60-73 motors.
Good luck with the rebuild. Dont forget to replace the oil pump, I found out there are two different ones to based on the size of the oil mounting bolt. They are NOT interchangeable.
__________________
Steve Stock
Gig Harbor, Wa
1953 Chevrolet 3100
261 cu inch, SM420
Finished Cab off restoration
1964 GMC 1000
305 V6, SM 420
Restoration is now started, still looking for an oldsmobile style power steering pump
|