Quote:
parts of it look good and other parts do not look so good. try a da sander with med fine paper and see if you can feather it out a little. just my opinion
rick
|
Thanks for the feedback ilvracn! I have done a little work with 00 steel wool (see picture) and was going to move to 'ultra fine' scotchbrite next. I have been keeping it to a small area toward the front of the bed...maybe a foot from the front edge back. You can start to see a little blue coming through. I don't want to go too deep but that area is VERY rough texture wise so I have to get to something smoother at least.
Anyway, I will keep on going with it and will switch to the DA if needed as well. Thanks!