View Single Post
  #5  
Old July 31st, 2024, 12:32 AM
AngryPirate's Avatar
AngryPirate AngryPirate is offline
-= Dues Paid =-
 
Join Date: Jul 2014
Location: Austin, TX
Truck: 1960 GMC 1/2 ton SWB Fleetside
Posts: 72
Thanks: 1
Thanked 0 Times in 0 Posts
Rep Power: 86
AngryPirate is on a distinguished road
Default Re: Holley 2300 Conversion woes

[QUOTE=James;78148/]
Thanks for the clarity and the wisdom.

The fuel level was indeed quite low.
That has been addressed.

Now to figure out why my coil isn’t sending out any spark (old one started doing this yesterday and new one I picked up today is behaving the same).
The + side has current and the neg has current when ignition on.

There are 2 wires going into the + side but only one has current. I suspect that is normal since one likely goes to the starter solenoid?

I’m going to have to pull out a wiring diagram and do some hunting.

Thanks again!
Reply With Quote