Quote:
Originally Posted by Pfroman
My question is- If I turn the distributor shaft with a drill, will that bring oil all the way up to the special bolt in the head, or will it just bring the oil to the rear cam bearing (priming) for the cam bearing to force it to the head. If I turn the crank by hand will that push any oil up there or do I need significant oil pressure from the pump?
|
With the head off and with the help of an assistance, cranking the engine with the starter should bring the oil up the hole in the block deck. Be sure the fuel supply is disconnect from the fuel pump to prevent fuel from spraying everything (if electric fuel pump, be sure to pull the fuse) and causing a fire.