Re: 1966 GMC 1000 - Making it Mine!
I cleaned the frame rails with a wire wheel and sprayed them down with Rust Reformer. I will eventually get the inside of the rails and underneath as well... and they will be painted with satin black.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
I started on the back of the cab to see what I was dealing with... particularly around that bad spot. I really like my SCT from Eastwood... but it is SO heavy on vertical surfaces. Also using a sander with 80 grit, and a die grinder with 2" fiber disc.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Got into a lot of body filler where the cab corners had been done. Since I am at it... I might as well take it ALL the way to bare metal to treat and build it back up. It is coming along.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
|