February 22nd, 2023, 07:08 AM
|
 |
Member
|
|
Join Date: Jun 2019
Location: Tirol, Austria
Truck: GMC 1500 1965
Age: 42
Posts: 76
Rep Power: 64
|
|
Re: Turn signal flasher
Quote:
Originally Posted by GMCTom
Ok, I connected the front harness with the turn signal and the rear harness with tail lights. Originally wired.
I have no turn signal and no brake light. Only the tail light is working. Flasher is also working directly connected to the battery.
On the brown connector on the fuse panel where the flasher is placed, my multimeter shows 12V (with ignition on). But now I found out that on the brown connector is connected the L of the flasher.
For my understanding L is normaly load with bulbs and ground. Should I change brown and violett connector on the fuse panel? X = battery/brown, L = bulbs/ground/violett. Please correct me if I‘m wrong.
Greetings
|
My fuse panel is wired like the original wiring diagram. But the L of the flasher is connected to the brown terminal.
Original wiring diagram
Original wired
New wired
Last edited by GMCTom; February 22nd, 2023 at 07:17 AM.
|