View Single Post
  #1  
Old February 19th, 2019, 10:18 PM
jagarra jagarra is offline
-= Dues Paid =-
 
Join Date: Apr 2014
Location: Reno, NV
Truck: 1962 Custom Wideside SB
Age: 74
Posts: 218
Rep Power: 95
jagarra is on a distinguished road
Default Correctly made window beltline felts

Guys,

Finally found them, correctly made beltline felts that go on your door at the opening at the bottom of the window.

Most suppliers like L&M ,classic and others are all getting them from a supplier in Taiwan, or China and these units are made incorrectly. The issue is the placement of the mounting pins, on these units, the pins are in the middle section of the beltline piece. What this does is place the bottom edge of this too low so when you try to roll the window up you CAN'T because the channel holding the window hits it so a gap is always at the top. I just received a set made in the USA, with the pins located at the bottom, they are a copy of the originals, made with a steel frame, steel pins.

https://www.rubbertherightway.com/19...89490-prd1.htm
Reply With Quote