Quote:
Originally Posted by kchampagne
Well the engine, I was told, was built approx.. 10 years ago and sat for a while. I am trying to track down the original owner who had the engine rebuilt. I am only guessing that it was run more recently with bad gas causing the valves to stick. Probably causing 2 pushrods to bend. I cleaned the heads up and they now appear to be okay. I am working with Rustbucket to get good running 305 to replace it. I plan to take the block to a machine shop and have the one cylinder repaired (see photo with the grooves cut by the piston wrist pin). Hopefully I will then have a working spare engine.
Thanks again for all of your responses and great advice!
Ken
|
Greetings kcchampagne!
From what I've seen and read about in your thread, there are some people out there who should not be allowed to possess a wrench, much less be allowed to work on or rebuild engines of any kind!