Re: existing seat belt holes for 1966
Quote:
Originally Posted by Pops
Thanks Ed. In short, since I already have four existing holes, I do not have to drill any additional holes for the retractors. I realize I will need to drill for shoulder. Two thoughts: does the plate and nut for shoulder bolt come with kit? Secondly, the factory position for shoulder bolts looks too high. From your response, I take it I can bring down a couple inches. Do you have pictures of your installation?
|
Here are a couple of photos from the installation in my 2WD '67, Pops. I used the factory location of course for the B pillar mounting. Since your '66 does not have those holes already, you can drill yours at any height you want. The plate and nut do come with the kit. A few inches above shoulder height is pretty comfortable, I think.
__________________
Ed Snyder
Medford, Oregon
1962 1000 Pickup 401M & Muncie 318 with overdrive
1962 K1000 Suburban 401M & SM420
1967 CM1500 pickup 351E & NP435
Last edited by Ed Snyder; August 9th, 2014 at 06:58 AM.
|