Re: My woodsplitter project
Dac, you were right on. The hose that blew off is one that NAPA put together for me and instead of doing 1/2 inch they did 5/8 inch. so I had to get this:
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
I taped it up and put it on the new hose:
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
Then I fired it up and pressed the plunger. The hoses held great! Then the motor died. The cylinder didn't move a bit. I started the motor up again and slowly pressed the lever so it put gentle pressure on the cyl from the inside then I banged the crap out of it with a sledge hammer. I worked my way up to "hard as you can hit" power. It moved 1/8 inch. I think it might be frozen.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
__________________
Step by steps:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
|