View Single Post
  #1  
Old October 1st, 2018, 07:43 PM
62Burb 62Burb is offline
-= Site Supporter =-
 
Join Date: May 2013
Location: Naples, NY
Truck: 1963 Custom Suburban Carryall - 95% original, all 3 seats, Mark IV A/C, PS/PB, 305E V6, Palamino Tan
Age: 70
Posts: 91
Rep Power: 91
62Burb is on a distinguished road
Default Turn Signal Switch kaput?

I'm working on a dozen things at once trying to get my '63 Suburban ready for inspection. I have non-working tail lights (dual filament bulb checks out OK), and the turn signal is not working correctly. The turn signal lever will not stay in position, right or left, unless held there. When held there, the appropriate front signal turns on but does not blink; nothing from the rears w/ turn signals or brakes. I am starting to work my way through the diagnostics on Jolly's pages, but I strongly suspect the in-the-column turn signal switch is broken. IF so, my understanding is a '63 replacement switch is a direct plug-in. Anyone been down this rabbit hole? I'd prefer to keep the existing steering column if possible.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote