Re: Fuel Line from to Carb From Pump
Go to O'Reilly's, buy one of their pre-made fuel lines with fittings already on and bend to suit. They have about 8 different lengths of 5/16 or 3/8 steel line. You may or may not need adaptor fittings for pump or carb. A bender is cheap. Use a coat hanger or equiv for a mock up pattern. Practice on some old tubing. Piece of cake, way cheap. I do this all the time for fuel and brake lines except a complete restore, then I buy bulk line and fittings and flare and bend. What motor? Summit has pre made lines but did not know what 6 cyl you have in there.
Last edited by AZKen; January 4th, 2016 at 11:15 PM.
|