View Single Post
  #27  
Old August 4th, 2021, 06:30 PM
Prowbar Prowbar is offline
Member
 
Join Date: Dec 2020
Location: Friesland, the Netherlands
Truck: 1965 GMC 1500, 305E, SM420
Posts: 67
Rep Power: 27
Prowbar will become famous soon enough
Default Re: '65 GMC 1500 project. From the Netherlands

Working on the frame paintjob. Already did the rear of the frame while it was on the ground, now doing the frame rails underneath.

I'm using this product for the first layer:

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Basically a product that penetrates the surface rust on the frame. This seals off the rust. It is applied with a very light coat. luckily the frame had very little loose rust that had to be brushed off first, so this saved a ton of time.

When this coat is fully completed, I can move on to the final paint. This is a black chassis/frame paint from Monopol. It is a 2 part deal, based on epoxy.

Some places of the frame I cannot reach right now, because other parts are in the way. These will be done later, whenever the cab is lifted off. I will do what I can, which is the frame and crossmembers, parts of the radiator support etc.

To project the several grease fittings on the front suspension and driveshaft from dirt and dust, these are small cups available for them. To try these out I have fitted them on the grease fittings. We'll see how it works out in the long run.

Also discovered that the oil pan and bellhousing recieved a nice dent, luckily no rubbing from the flywheel. See picture.
Attached Images
File Type: jpg 20210802_161510.jpg (3.85 MB, Multiple views, 3 clicks)
File Type: jpg 20210803_110633.jpg (4.36 MB, Multiple views, 3 clicks)
File Type: jpg 20210803_110642.jpg (3.32 MB, Multiple views, 2 clicks)
File Type: jpg 20210802_161732.jpg (4.53 MB, Multiple views, 2 clicks)
File Type: jpg 20210803_104732.jpg (3.02 MB, Multiple views, 2 clicks)
Reply With Quote