First thing you should have is a wiring manual for your truck, before any electrical troubleshooting can be performed.
Quote:
Originally Posted by esquibdl
Now my attention is on the front park lamp/turn signals which are not working.
Question: Where/how do the front park lamp turn signals get their ground from?
|
The front will ground at the lights. If the hood is not grounded to the frame it won't turn on.
Quote:
Originally Posted by esquibdl
Also, I have noticed that the dome light inside the cab will not come on either.
|
Check your fuses, it should be label Tail/Stop/Dome. Dome light come on when the headlight knob is turn full bright. There should be a detent in the switch when it turn on. For it to operate by the doors a switch will need to be added to both door frames between the hinges.
Quote:
Originally Posted by esquibdl
One more thing I just noticed is that when I turn on the ignition switch to start the truck my rear taillight/turn signals stop working while the truck is running. They work perfectly fine in the AC mode of the ignition switch but not after I start the truck.
|
This sound more like a bad ignition switch. It should operate in run and ACC position.