View Single Post
  #3  
Old May 24th, 2021, 10:09 PM
BobShing BobShing is offline
Junior Member
 
Join Date: Apr 2021
Location: Ozark, Arkansas
Truck: 1962 series 1000 pickup
Age: 74
Posts: 23
Rep Power: 25
BobShing is on a distinguished road
Default Re: 63(may be '62) Build

So, today’s challenge:
The brake drums are the same, front & rear... well, not really. The fronts have 7/16 stud holes, but the rears have a larger hole to accommodate the shoulder on the studs. So I can drill them out, but think a trip to the parts store may be in order, since a longer thread reach would be better to accommodate mag wheels. Not sure the shoulder would be the same on a longer stud. And btw, the front studs are smaller in the knurled area. The Dorman web site has a wealth of info on wheel studs, so here we go...
Attached Images
File Type: jpg image.jpg (1.46 MB, Multiple views, 7 clicks)

Last edited by BobShing; May 24th, 2021 at 10:15 PM.
Reply With Quote