View Single Post
  #10  
Old January 24th, 2022, 09:27 PM
Caseyjones Caseyjones is offline
Junior Member
 
Join Date: Jun 2021
Location: Portland, OR
Truck: 1964 GMC 1500
Posts: 14
Rep Power: 24
Caseyjones is on a distinguished road
Default Re: 1964 Palomino Tan build

I posted this over in the transmissions section too...hoping to get some input or leverage some experience on a predicament I've run into with this AX15...

It's my understanding that the GMC bellhousing can't be removed without removing the flywheel. Unfortunately the Novak adapter is designed to be mounted to the bellhousing with the bolt heads inside the bellhousing, requiring that the bellhousing and trans are mounted to the engine as a unit. The front of the AX15 transmission case partially covers the upper trans-to-bellhousing holes on the adapter.
I have considered using a die grinder to clearance the transmission case for socket head cap screws. One notch would get very close to one of the dowel pins that locates the trans to the adapter, but there shouldn't be any potential for breaking through the case.
Before I carve up my transmission I thought I'd check in here to see if I'm thinking about this correctly and if anyone else has solved this another way...
Reply With Quote