View Single Post
  #9  
Old December 21st, 2021, 12:25 PM
Caseyjones Caseyjones is offline
Junior Member
 
Join Date: Jun 2021
Location: Portland, OR
Truck: 1964 GMC 1500
Posts: 14
Rep Power: 24
Caseyjones is on a distinguished road
Default Re: 1964 Palomino Tan build

Thanks-sorry about the double post…it took a few days for the first one to pop up.

The collapsible shaft was needed because the rag joint end of my replacement steering column had already been cut. I bought the shaft and rag joint through CPP and I bought a DD u-joint. I cut the shaft and used an angle grinder and a file to shape the steering shaft to fit the u-joint using this method:

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?


I thought I had the right rag joint when I ordered the shaft but it didn’t end up matching so I used the steering box end of my old rag joint on the collapsible shaft.
Reply With Quote