Re: Transmission cross member ??
there is no crossmember to remove--transmission hangs on bell housing. Simply remove floor pan, then driveshaft(with attached hanger bearing), parking/emergency brake cable(if underdash type like 1000 series), then 4 3/4" bolts. Grab transmission by the shift lever and work out away from the bell housing and lower to the floor. After setting the transmission on the floor, remove the gearshift retainer, take out the gearshift lever and the lever for the parking/emergency brake lever asm., and slide out from under vehicle. I hope this is of some assistance in this matter.
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|