Re: Too much timing?
Update:
With the steel vacuum line (for vacuum advance) disconnected from the back of the carb, I connected my vacuum gauge to the back of the carb and here are the results:
0.8 inches @ 500 RPM
2.0 inches @ 800 RPM
5.0 inches @ 900 RPM
When I tested my vacuum advance the other evening, it started to move at 5.0 inches.
My vacuum reading off the back of the intake manifold (at idle) is consistently 19 inches.
Based on what I provided above, sounds like I'm losing vacuum in the carb?
|