September 26th, 2014, 07:37 PM
|
|
Senior Member
|
|
Join Date: Mar 2013
Location: Austin, TX
Truck: 1964 Fenderside 1000
Posts: 158
Rep Power: 109
|
|
Re: Holley Carburetor Conversion
I am almost 100% certain that the carb you posted is the same one that I used but you might want to wait for somebody else to chime in before you pull the trigger.
The installation was very easy - I even helped. We had done an engine swap from a '66 to my '64 and added the Holley a few months later. The adapter is required and you may have to purchase a different return spring and perhaps tweak the rod coming from the accelerator linkage. In my case I think we added a different return spring mounting "bar" so the spring would not interfere with the larger carb.
Ive attached a before and after. Sorry the images are so small. I hope they help.
|