Re: Motor Mounts
The original front GMC V-6 engine mounts (part #2391949) are obsolete and I have not seen any NOS ones for years. Your choices are have your originals re-vulcanized or use NAPA 620-1045. The major difference is the NAPA mount has a single stud on the bottom, the original mount has 2 threaded holes. You may have to drill a hole in your motor mount perches to make it work. As for the rear bell housing mounts, take a look at Anchor 2162 (upper) and Anchor 2163 (lower). Rockauto has them. These are regular GM medium duty truck mounts that were used for many years, and they fit the later pickups as well. You might be able to modify them.
|