Hello,
I haven’t posted to the board much but I would like some help in doing the carburetor conversion from the Stromberg to the Holley. I have a 1962 1000 truck with a 305D engine. I have already upgraded to the electric fuel pump.
I don’t have the tools or expertise to do this conversion so I am going to have a garage mechanic do the work. He would like me to source the parts.
I started with the information on the
http://6066gmcguy.com site on the Holley 500 CFM 2-BBL #4412 page but the part numbers have changed since it was written.
I located the following parts at Jeg’s:
The Holley 500 CFM 2-BBL
Holley #510-0-4412C
http://www.jegs.com/i/Holley/510/0-4...rentProductId=
Mr. Gasket Adapter
Adapter #720-1937
http://www.jegs.com/i/Mr-Gasket/720/1937/10002/-1
Can anyone verify the above part numbers I have located for the conversion? Also, are there any other parts I should consider or will need?
One last question, will my original oil bath air filter fit on top of the new carburetor?
Any other recommendations to consider would also be welcome as I feel I am flying blind here.
Thanks for your help.
Brian
Santa Rosa, CA