View Single Post
  #2  
Old October 28th, 2015, 04:05 AM
Ed Snyder's Avatar
Ed Snyder Ed Snyder is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Medford, Oregon
Truck: 1962, 1965, 1967
Posts: 868
Rep Power: 343
Ed Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura about
Default Re: Differences in GMC and Chevy Frames?

Quote:
Originally Posted by HOTRODJOHN View Post
I am trying to find out the difference in the GMC & CHEVY frame. I know that the GMC has a leaf spring rear but are the front suspensions the same and the other body parts interchangeable. I want to shorten the frame to make it a short bed and trying to figure out if the articles I see on how to do it close enough or should I figure something out myself. Thanks, John
When I did the "restoration" (or "restomod" or whatever you want to call it) on the green '66 you can see in my avatar, John, I had the long bed frame shortened to be able to put a short bed on it. If you're wondering if a Chevy short bed will fit on a GMC frame, it definitely will because that's what I did. I had the first cut made straight down from the back of the cab and the second cut made 12" to the rear. The joined sections were reinforced with "fish plates". Another 8" was cut off the tail ends of the frame rails. Then the Chevy short bed bolted right on using existing holes in the GMC frame. Hope this helps!
Attached Images
File Type: jpg 0030.jpg (56.9 KB, Multiple views, 36 clicks)
__________________
Ed Snyder
Medford, Oregon
1962 1000 Pickup 401M & Muncie 318 with overdrive
1962 K1000 Suburban 401M & SM420
1965 2500 Suburban 351C & SM420 with Watson overdrive
1967 CM1500 pickup 351E & NP435
Reply With Quote