Thread: 1965 k1502
View Single Post
  #4  
Old July 7th, 2013, 11:20 PM
stormyZ71 stormyZ71 is offline
Temporarily Suspended
 
Join Date: Jan 2013
Location: Browns, Alabama
Truck: 1965 k1502
Age: 36
Posts: 6
Rep Power: 0
stormyZ71 is on a distinguished road
Default Re: 1965 k1502

These are some of the pics of replacing the inner and outer rocker panels on the passenger side along with some of the floor board. The first picture is the rear door jamb and the dots are where the spot welds were. The second is the front pillar. The easiest way I have found to take out the spot welds are to take and drill them with a 1/2" drill bit until the outer piece of metal lets go, I will take some pictures of the old rocker that show where the welds were. I put the outer rocker on but haven't taken any pictures yet.
Attached Images
File Type: jpg DSC_3285.JPG (4.28 MB, Multiple views, 7 clicks)
File Type: jpg DSC_3286.JPG (4.25 MB, Multiple views, 4 clicks)
File Type: jpg DSC_3287.JPG (4.34 MB, Multiple views, 4 clicks)
File Type: jpg DSC_3288.JPG (4.07 MB, Multiple views, 4 clicks)
File Type: jpg DSC_3289.JPG (4.42 MB, Multiple views, 3 clicks)
Reply With Quote