Re: Not getting power to coil
You don't need a Pertronix coil. No No No. Use the one you have. Take all wires off of coil. Set MM to lowest ohm reading. One MM lead on pos, one lead on neg. Read ohmage. Ignitor II can use any coil with 0.6 Ohms or greater. This will all be explained in the Ignitor II instructions.
They do recommend bypassing the resistance wire. We will discuss wiring the Pertronix if/when you buy it.
Last edited by AZKen; March 8th, 2022 at 05:49 AM.
|