View Single Post
  #2  
Old November 23rd, 2013, 03:56 PM
Funky61's Avatar
Funky61 Funky61 is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Corona, CA
Truck: 1961 Suburban 1962 GMC Utility
Posts: 1,134
Rep Power: 410
Funky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really nice
Default Re: gmc frame rail number

Welcome Arno!

If that number is stamped on the frame, just below the door area, I believe it is a part number. You would have another on the other side.

My 70 GMC has similar numbers stamped there. Usually on the Chevy trucks, the partial VIN number is stamped next to the Steering box on the frame. Again my 70 does not have one there.

I've been told that the VIN may be stamped on top of the frame, just below the cab/driver seat area. You might be able to see it with a mirror. I've yet to check this out on my suburban.

Here is a photo of those frame numbers I think you refer to; remember this is for a 1970 and these are 'part numbers" for the frame.

Next photo shows the area that might have a partial vin number.

My 73 does have a partial vin stamped on the driver-side upper frame area by the power steering box as mentioned. Hope this helps some.
Attached Images
File Type: jpg IMG_0884.JPG (1.46 MB, Multiple views, 2 clicks)
File Type: jpg IMG_1210.JPG (1.20 MB, Multiple views, 1 clicks)
__________________
1961 GMC Suburban 305A Overdrive
1962 GMC Utility 305D
Reply With Quote