Re: 1960 k1001
Next one I will drill holes for the cutout to create a radius. The square, overcut corners on the first one are stress risers and could cause crack/break. Will weld that one and fix corners. I may be cutting a huge chamfer from the strap to bottom inside corner. The bracket will be 2X bolted to the frame using at least one old hole. Also gotta check fender sheet metal, etc for interference. Don't remember what is near. Bracket will be about 1/2 higher to maintain CL to CL dimension (18"). But that is not that critical. Shocks are Monroe 31000.
Last edited by AZKen; November 8th, 2014 at 10:25 PM.
Reason: clarify
|