Re: 63(may be '62) Build
So, today’s challenge:
The brake drums are the same, front & rear... well, not really. The fronts have 7/16 stud holes, but the rears have a larger hole to accommodate the shoulder on the studs. So I can drill them out, but think a trip to the parts store may be in order, since a longer thread reach would be better to accommodate mag wheels. Not sure the shoulder would be the same on a longer stud. And btw, the front studs are smaller in the knurled area. The Dorman web site has a wealth of info on wheel studs, so here we go...
Last edited by BobShing; May 24th, 2021 at 10:15 PM.
|