View Single Post
  #2  
Old February 28th, 2021, 11:40 AM
James James is offline
-= Extreme Supporter =-
 
Join Date: Jun 2013
Location: Greer, SC
Truck: 1964 GMC 1500 2wd
Age: 69
Posts: 432
Rep Power: 199
James will become famous soon enoughJames will become famous soon enoughJames will become famous soon enough
Default Re: 305 Question about valves

The 305 is a non-interference motor. I have measured the valve clearance on a stock 305 head and a magnum head. On the 305 with a valve lift of approximately .450" (valve wide open) lift it will still have a minimum of .150" clearance (piston at top dead center). On the magnum head with a valve lift of approximately .450" (valve wide open) lift it will still have a minimum of .120" clearance (piston at top dead center). Hope this help.
Reply With Quote