Quote:
Originally Posted by Pops
If a 1965 half ton swb now has a inline six with a saginaw tranny, would that throw off the pinion angle if the truck sets stock (still has 8 leafs each side, coil fronts). I ask because I believe the "65 GMC's only came with v6's and a Muncie trans.
A lot of folks write about angle probs causing vibration probs at lower speeds, but that doesn't make sense to me unless you lower or raise a truck.
|
Okay, here is the question.
Does your VIN start with an "I" ?
If so, the inline is stock.
Since the 1965 GMC factory manual has a section on the inline 6, there is every possibility that it is stock.