View Single Post
  #1  
Old September 12th, 2021, 12:32 PM
charrisboyette charrisboyette is offline
Junior Member
 
Join Date: Mar 2018
Location: Middletown, RI
Truck: 1963 GMC 1000
Age: 44
Posts: 5
Rep Power: 0
charrisboyette is on a distinguished road
Default Rear Brakes Dragging

Hey Guys,

Iíve got a GMC 63 half ton that is stock. Had it for a few years now. Took it to a shop a couple of years ago because I was having a hard time stopping. They replaced the front right shoes and wheel cylinder. At that time my pedal got hard but it stopped really good. I thought that was how it was supposed to be as I had never had non-power brakes.

Fast forward a couple of years and I have been chasing down an overheating issue. I checked the wheel temp after a hot drive and the back brakes were very hot. The fronts were not even warm. Identified that problem hopefully. I wrestled the drums off and replaced the shoes, wheel cylinder and drums for both brakes. I also checked the adjustment of the hand brake cable. The rears are still dragging.

So, is there a difference in the two wheel cylinders? I see that there are two available. I ordered both but replaced them with what was there. Could the wrong ones cause the issue? I have the star adjusters completely adjusted in. I am at whits end. Was I supposed to use GMC specific brake shoes that they donít make any more? Iím starting to humor deleting the hand brake as a possible solution but wanted to hear something sane since I am well aware of the dangers of getting rid of that on a single channel brake system.

Sorry for the novel. I was just trying to put as much info out there as possible. Any ideas would be greatly appreciated. I actually use and enjoy this truck.
Reply With Quote