View Single Post
  #6  
Old March 7th, 2021, 08:22 PM
James James is offline
-= Extreme Supporter =-
 
Join Date: Jun 2013
Location: Greer, SC
Truck: 1964 GMC 1500 2wd
Age: 69
Posts: 432
Rep Power: 199
James will become famous soon enoughJames will become famous soon enoughJames will become famous soon enough
Default Re: Positive camber... just remove the shims?

Take a tape measure and measure the toe on the front and back of the front tires. Should be toe in approx 1/8" (front of tire closer together than the back of the tire), this allow the wheels to roll down the road straight. Too much toe in could cause excessive wear on the outside edge of the tires. Too much toe out can cause excessive wear on the inside edge of the tires. Also wider rim/tire will make this wear more noticeable.
Reply With Quote