View Single Post
  #5  
Old December 6th, 2014, 04:59 AM
AZKen's Avatar
AZKen AZKen is offline
-= Dues Paid =-
 
Join Date: Jul 2014
Location: AZ
Truck: 6066GMC
Posts: 1,430
Rep Power: 441
AZKen is a jewel in the roughAZKen is a jewel in the roughAZKen is a jewel in the roughAZKen is a jewel in the rough
Default Re: Toro Flow swaps?

I am not an expert but have been reading some info I have. List of parts needed. Bell housing . Clutch pressure plate and throw out bearing. Motor stands and v6 motor mounts. Throttle arm. V6 starter. V6 engine harness. GMC v6 radiator. The 230-250 radiator is a bit small for a 305 and way to small for a 351. If you are using the original alternator and regulator you will need to move the regulator to the passenger fender well. If you get a big truck motor you will also need the front timing gear cover off a light truck engine.
Reply With Quote