![]() |
![]() |
|
GMC V6 and V12 Engines Engine repair and rebuilding |
![]() |
|
Thread Tools |
#1
|
||||
|
||||
![]()
Is there anyone that makes them? Or is there anyone who makes the Vacuum Advance Pump? My old one isn't moving back and forth and its causing the engine to have a terrible idle. Its a weird one to...has little hose ports on the front and back...ones I'm used to only have one hose connection...I tried one off of a 6 cylinder distributor(it only had a single hose connection) and the engine would run but it had a constant "advance retard advance retard" in other words...the little lever would constantly be moving the points back and forth and back and forth...so...I assume it has to have the original one with 2 hose connections....would like to just put a whole darn new points dizzy in there and get it over with, but if a reman advance pump is available that would be cool. Have called Napa about parts for the 305 in the past and they had troubles. lol Thanks for any info.
EDIT: Found one at Auto Zone. On its way and will be here Wednesday. Good to go guys so far. Let ya know this coming weekend when I put it in.
__________________
"Excuse the rust I use my truck" 1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 1964 Chevy C20 292/SM420 1966 Chevy C10 292 hotrod 6/TKO600 My youtube channel aka Military Chevy: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by TJ's GMC; May 25th, 2015 at 07:57 PM. |
#2
|
|||
|
|||
![]()
Amazon. I bought one for 35.97 last September. Cardone 30-11650, Remanufactured Domestic Distributor. Checked the price now its 66$. Hope that helps.
|
#3
|
||||
|
||||
![]()
I looked up the same one..cheapest I could find was $57 with a core charge. My dizzy was a strange one to...on the vacuum advance it had two hose ports instead of one.
__________________
"Excuse the rust I use my truck" 1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 1964 Chevy C20 292/SM420 1966 Chevy C10 292 hotrod 6/TKO600 My youtube channel aka Military Chevy: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
#4
|
||||
|
||||
![]()
I've seen some pictures of v6's with HEI's on them. Was there ever a time when GM made an actual HEI for these engines?
__________________
"Excuse the rust I use my truck" 1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 1964 Chevy C20 292/SM420 1966 Chevy C10 292 hotrod 6/TKO600 My youtube channel aka Military Chevy: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
#5
|
|||
|
|||
![]() |
#6
|
||||
|
||||
![]()
Funny! I just was looking at that one. lol Been considering. Thanks!
__________________
"Excuse the rust I use my truck" 1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 1964 Chevy C20 292/SM420 1966 Chevy C10 292 hotrod 6/TKO600 My youtube channel aka Military Chevy: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
#7
|
|||
|
|||
![]()
On my 66 GMC P/U I purchased a Buick V6 even fired distributor and machined up an adapter, works great, had to change the advance springs.
__________________
Clyde McKaba Abbeville,SC 1961 GMC Suburban 4WD 305 V6, 4spd 1966 GMC 3/4T P/U 351 V6, Turbo 400,Gear Vender OD 1969 GMC Suburban 1/2T |
#8
|
||||
|
||||
![]()
I was think on that dizzy as well. Heard alot about it.
![]()
__________________
"Excuse the rust I use my truck" 1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 1964 Chevy C20 292/SM420 1966 Chevy C10 292 hotrod 6/TKO600 My youtube channel aka Military Chevy: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
#9
|
|||
|
|||
![]()
I built a Buick HEI for my V6 back in 1991, wouldn't have it any other way. You can't beat it for reliability, availability of parts and performance.
|
#10
|
|||
|
|||
![]()
The GMC V6 was two years short of seeing the HEI, though most all GM cars and Light duty trucks got HEI in 1975 as standard equipment, larger trucks didn't get it till 1976.
|
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Re: [6066 GMC Truck] aftermarket 305E distributors | Archiver | Previous Forum Posts | 0 | January 8th, 2004 12:04 AM |
RE: [6066 GMC Truck] aftermarket 305E distributors | Archiver | Previous Forum Posts | 0 | January 5th, 2004 12:21 AM |
Re: aftermarket 305E distributors | Archiver | Previous Forum Posts | 0 | January 5th, 2004 12:11 AM |
Re: [6066 GMC Truck] aftermarket 305E distributors | Archiver | Previous Forum Posts | 0 | January 4th, 2004 12:39 AM |
aftermarket 305E distributors | Archiver | Previous Forum Posts | 0 | January 4th, 2004 12:07 AM |