6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Transmissions and Rear Ends
#Sponsored

Transmissions and Rear Ends Three on the tree or four in the floor? Shift it all here.

Reply
 
Thread Tools
  #1  
Old June 10th, 2013, 04:41 AM
phelan phelan is offline
Junior Member
 
Join Date: Apr 2013
Location: Amarillo
Truck: 1966
Age: 39
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 78
phelan is on a distinguished road
Default 2.54 gears of similar for Dana 44?

After looking at gear ratios and quite possibly falling into a deal on a 478M, I'm thinking my plan of 3.07s probably won't be as low as I'd like. I know some Jags had 2.xx gears in D44 carriers, could those possibly work? I suppose the other logical option is does anyone know a late model full size GM truck that had similar gears? I wouldn't be opposed to changing the whole rear axle if I can find one with the same 6 lug pattern and I'd rather the 3" center hubs down the road anyway.
Reply With Quote
  #2  
Old June 10th, 2013, 03:59 PM
raycow raycow is offline
Senior Member
 
Join Date: Jan 2013
Location: San Francisco, CA
Truck: 1960 C-10 Short Fleet
Posts: 129
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 105
raycow is on a distinguished road
Default Re: 2.54 gears of similar for Dana 44?

The GM 8.5" rear was available with 2.56 and 2.41 gears. It was used in 1/2 ton trucks starting in 1980. To get 6 lug shafts you will need to get one from a 4WD truck or else swap the shafts from a 4WD truck into a 2WD housing. If you get only the gears and want to put them into a different rear which originally had 2.73 or shorter gears, you must also get the differential case (the part the ring gear bolts to). The case you need was used with 2.41 and 2.56 only. Parts availabilty and aftermarket support for this rear are extremely good.
http://www.globaldrivetrainsupply.co...ferential.html

I haven't got a clue about the Jaguar rear.

Ray

Last edited by raycow; June 10th, 2013 at 04:42 PM.
Reply With Quote
  #3  
Old June 13th, 2013, 09:24 PM
phelan phelan is offline
Junior Member
 
Join Date: Apr 2013
Location: Amarillo
Truck: 1966
Age: 39
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 78
phelan is on a distinguished road
Default Re: 2.54 gears of similar for Dana 44?

Awesome, thanks for the info!
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1966 GMC Dana 44 2WD spider gears gmccollector Transmissions and Rear Ends 2 May 14th, 2015 04:28 AM
3.07 gears for my Dana 44 phelan Transmissions and Rear Ends 6 April 28th, 2013 02:46 PM
Re: My truck//similar ages and interest?? Archiver Previous Forum Posts 0 August 16th, 2010 01:27 AM
Re: [6066 GMC] My truck//similar ages and interest?? Archiver Previous Forum Posts 0 August 14th, 2010 01:14 AM
Re: [6066 GMC] My truck//similar ages and interest?? Archiver Previous Forum Posts 0 August 14th, 2010 01:00 AM


All times are GMT +1. The time now is 12:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 841730414881|1729209275|0