Pay Dues or become a Site Supporter |
#1
|
||||
|
||||
305a V6 ignition parts
Where do I find them?
I want a new: - cap ( believe its a screw down type, not the 1/2 or 1/4 turn latching kind ) - rotor - condenser - coil - wire set I found some parts here, but I'm not sure of the cap since they don't show the underside. If someone has bought these before and still has their order history and manufactorurer & part numbers, that would be super helpful. Thanks, Scott |
#2
|
||||
|
||||
Re: 305a V6 ignition parts
Scott, you need to learn how to use the internet for parts more effectively. If you can't find them, we can help. But you need to try first. I found everything you want at the first place I tried , Rockauto. This is not to discourage you from posting a problem or question. Trying to inform you that all we do is look it up for you. Try O'Reilly's, Autozone, Napa, etc. or whatever you have in your town if you don't want to order online from Rockauto or your link. Usually if you have searched correctly and they say it fits, it most likely fits. Buying locally is always better to check the part at the counter and for returning. But I buy a lot from the internet because of price and not available locally.
P.S. I have the same truck you have....cool! Last edited by AZKen; July 16th, 2015 at 06:34 PM. |
#3
|
||||
|
||||
Re: 305a V6 ignition parts
Quote:
Quote:
I owned a 61' chevrolet truck with a more conventional v8 and parts for that were super easy to find. I've ordered many ignition parts from Rock Auto that have turned out to not be correct for my truck. I'm asking these questions here because all the other avenues have failed to yield the correct parts for this non-typical engine. I have looked at other sites and they list parts for only the I-6 engines. Please don't assume someone is Internet inept or hasn't already attempted other avenues when they most likely have. The most likely case is, perhaps the distributor for my truck was switched out and is no longer oem and this is causing me to not find a match on all of the online resources. Thanks for the 'advice'. |
#4
|
||||
|
||||
Re: 305a V6 ignition parts
Another quick search on O'Reillys website shows every part you need for 1960 GMC 1000 series 305 V6. But you say you have ****"tried" them. I recommended you go to a place like that so as to be sure it fits and returns are "no questions asked." There are 14 O'Reilly's in Austin. If you have an odd ball Dizzy, you will have to identify it before anyone can help you. But I doubt you do. You are welcome for the advice. I like to help those who are trying to help themselves.
Some parts for these motors are hard to find, some are not. ****("Please don't assume someone is Internet inept or hasn't already attempted other avenues when they most likely have.") So go get your parts and get it running down the road. Last edited by AZKen; July 16th, 2015 at 09:34 PM. |
#5
|
||||
|
||||
Re: 305a V6 ignition parts
On the subject of Odd Ball dizzys...did anyone else ever have the dizzy with the dual vacuum port advance pump? My new one has a single hose, but my old one had two hoses coming from the pump.
__________________
"Excuse the rust I use my truck" 1964 GMC 1500 305E/sm420 4 barrel intake mod and dual exhaust. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. 1964 Chevy C20 292/SM420 1966 Chevy C10 292 hotrod 6/TKO600 My youtube channel aka Military Chevy: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
#6
|
|||
|
|||
Re: 305a V6 ignition parts
The thing I like about the various forums I visit, including this one, is the tradition of almost unfailing courtesy and helpfulness.
I don't read every post so there may be some "history" between Pirate and Ken that I have missed. If not, then the courtesy I expect seemed a little strained here. I hope it is a one-off. |
#7
|
||||
|
||||
Re: 305a V6 ignition parts
If you want to look up stuff for people who don't even try themselves, then they bite the hand that feeds them, why don't you look it up and help? instead of bashing on here. Your comment can only add to whatever "straining" is present. All my comments are full of genuine help in them, including a tip for a person on his very first post here. (That should have told you there is no history.) This issue had settled until you posted. The courtesy starts with not treating a forum as your secretary. "Hey look this stuff up for me guys while I go bowling".
Last edited by AZKen; July 19th, 2015 at 04:27 AM. |
#8
|
||||
|
||||
Re: 305a V6 ignition parts
Quote:
Ed
__________________
Ed Snyder Medford, Oregon 1962 1000 Pickup 401M & Muncie 318 with overdrive 1962 K1000 Suburban 401M & SM420 1967 CM1500 pickup 351E & NP435 |
#9
|
||||
|
||||
Re: 305a V6 ignition parts
Ed, after you posted I did some checking. Didn't know about smaller/larger dizzy. If vendors info is correct, I found that 60 and 63 use same cap but there are two choices for rotors, slip on pointer type and the two screw disc kind.
Last edited by AZKen; July 19th, 2015 at 08:44 PM. |
#10
|
||||
|
||||
Re: 305a V6 ignition parts
Here is some info from a GMC enthusiast and expert:
GMC v6 engines came with one of 3 different dizzies. First the externally adjusted style. Just like the 230-250-292 stuff. It has the spring arms to hold on the cap. Next is the internal adjusted style. More or less the same as the later 235-261 Chevy and jimmy 248-270 302. Screw on cap. Third is the externally adjusted dizzy with the governor control. This has 2 vacuum ports and is taller under the cap. These came on 1-1/2 ton and larger. There seems to be no rhyme or reason for use of the first two styles. Though the externally adjusted caps seem a bit more common. Both styles have appeared on all series of 305 engines. |
Bookmarks |
Tags |
ignition, v-6 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
305A Parts | AZKen | 1960-1966 GMC Marketplace | 12 | September 28th, 2015 12:13 AM |
305A parts in AZ | AZKen | 1960-1966 GMC Marketplace | 0 | February 13th, 2015 10:57 PM |
305A-478M V-6 Rebuild parts. . . | Archiver | Previous Forum Posts | 0 | November 6th, 2009 12:25 AM |
Re: [6066 GMC Truck] 305A plus parts available | Archiver | Previous Forum Posts | 0 | June 19th, 2001 01:44 AM |
305A plus parts available | Archiver | Previous Forum Posts | 0 | June 17th, 2001 01:52 AM |