6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Builds and Journals
#Sponsored

Builds and Journals This is where the magic happens. Photograph & document your GMC build progress for posterity.
NOTICE - Photobucket will delete your pics after a time. Use another host if possible.

Reply
 
Thread Tools
  #21  
Old August 23rd, 2021, 03:39 PM
BobShing BobShing is offline
Junior Member
 
Join Date: Apr 2021
Location: Ozark, Arkansas
Truck: 1962 series 1000 pickup
Age: 74
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 29
BobShing is on a distinguished road
Default Re: 63(may be '62) Build

Wrapping up the Brake job, finally, after ordering the wrong parking brake cables, returning…then backordered, here’s the solution. Real original cables aren’t available, so I modified the new version. The backing plates don’t have an attachment point like Chevrolet. The cables have 2 brackets that bolt to the backing plate and secure the cable end. I had to remove the spring clip and grind the cable housing. One of the two brackets had to be removed from the old cable, and slotted to be used on the new cable.
Here’s the pictures.
Attached Images
File Type: jpeg 77BE86FA-2D0D-4923-B5E6-9C8B065508E0.jpeg (1.65 MB, Multiple views, 4 clicks)
File Type: jpeg D972D7AF-0016-4BB9-A7FF-3402EE75EFB5.jpeg (1.80 MB, Multiple views, 3 clicks)
File Type: jpeg BFB5E520-ED26-490B-859B-2AC9A45FFEEB.jpeg (1.74 MB, Multiple views, 3 clicks)
File Type: jpeg DA2E8E0F-692E-4AC6-BA24-CA0C8B661DB7.jpeg (1.30 MB, Multiple views, 3 clicks)
File Type: jpeg D5BDFB02-66FA-4E24-A0E6-B1C0759DA786.jpeg (1.62 MB, Multiple views, 3 clicks)

Last edited by BobShing; August 23rd, 2021 at 10:16 PM.
Reply With Quote
  #22  
Old August 23rd, 2021, 10:09 PM
BobShing BobShing is offline
Junior Member
 
Join Date: Apr 2021
Location: Ozark, Arkansas
Truck: 1962 series 1000 pickup
Age: 74
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 29
BobShing is on a distinguished road
Default Re: 63(may be '62) Build

So I figured it was time for a quick oil change... Wait, did I say quick? Researched the filter, and decided the wix 51123 was the ticket. (plenty of good input elsewhere in this forum). I should have been wary when I discovered rtv on the canister, but the real tipoff was the home made (milk jug) gasket. So the gasket from the 51123 was too small, and apparently the last owner used a Chevy filter... Too short! (not much filtering going on) And it didn't leak!
Solution was to rummage through old transmission kits and find the correct size square cut seal. (FYI Ford c4 and Chrysler 904 both had one) so much for quick oil changes.
Attached Images
File Type: jpg 20210819_163707.jpg (5.18 MB, Multiple views, 4 clicks)
File Type: jpg 20210819_164911.jpg (1.86 MB, Multiple views, 4 clicks)
Reply With Quote
  #23  
Old August 24th, 2021, 01:55 PM
jbgroby's Avatar
jbgroby jbgroby is offline
Senior Member
 
Join Date: Jan 2013
Location: Lacombe, LA.
Truck: 1960 8' fleetside
Posts: 715
Thanks: 0
Thanked 5 Times in 4 Posts
Rep Power: 283
jbgroby is a jewel in the roughjbgroby is a jewel in the roughjbgroby is a jewel in the roughjbgroby is a jewel in the rough
Default Re: 63(may be '62) Build

This was taken from another page

here is some part link info and alternative drum info from the archives in 6066 GMC site. Hope this helps.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?


Amazon.com: Centric Parts 122.66037 Brake Drum: Automotive

The front drums are easy. They are the same as a Chivy and should be easily found and are relatively cheap. They have a 3" height or depth. Here's Rockauto.com's listing.
RAYBESTOS Part # 2005R $33.79

The rear drums are a bit harder, but I have three part numbers you can try for rear 6 lug brake drums. These have a 3.5" height or depth. The first is CENTRIc Part # 12266037 . The second is Allsafe 2067 DGS or Raybestos 2067R.
Rockauto.com shows the Raybestos 2067R for $58.79. Rockauto.com also has the Centric Part #12266037's for $119.79.

I used the Allsafe 2067 DGS from Autozone. The 2067's are for a later model (i think 67-72) truck with 4 wheel drive. It has fins on the outside unlike the original that is smooth. The only modification that I had to make was to drill the 6 lug holes from 1/2" to 9/16" so that the drum would fit on the shoulders on the rear lugs like the original. This drum had the right offset unlike the Chivy drums.

On the Centric, I haven't used that one, but was told it was a direct match to the original (a bit pricier though).

I hope this helps with those looking for rear 6 lug drums.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
61, 62, or 63? Ed Snyder 1960-1966 GMC Marketplace 1 March 23rd, 2015 04:05 PM
62 k build Hobie Builds and Journals 16 April 20th, 2014 04:25 AM
62 GMC build tommyduncan Builds and Journals 29 February 2nd, 2014 06:00 PM
62-63 Hubcaps Archiver Previous Forum Posts 0 May 17th, 2012 01:51 AM
62 Suburban build sheets, pricing gear info etc. Archiver Previous Forum Posts 0 May 9th, 2000 01:05 AM


All times are GMT +1. The time now is 04:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 831730222135|1729049137|0