6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Wheels, Tires, Suspension and Brakes
#Sponsored

Wheels, Tires, Suspension and Brakes Keep them doggies rollin', rawhide

Reply
 
Thread Tools
  #1  
Old June 27th, 2023, 05:54 AM
Simonsays Simonsays is offline
Junior Member
 
Join Date: Apr 2021
Location: Los Angeles california
Truck: 1966 3/4 ton
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 29
Simonsays is on a distinguished road
Default 1966 3/4 ton front coil spring rates.

Looking for some knowledge folks. My 3/4 ton 1966 gmc pick up is getting front end rebuilt. I called eaton springs and was told the stock spring is thier ML 2022 spring which is rated for about 1018 lbs spring rate. Now when compared to the same year chevy c20 version that spring is considered heavy duty for a chevy c20. Same year in c20 the standard spring is listed as ML1766 which is listed at around 722lbs spring rate, this spring is standard for both c10 and c20.

So question, is does anyone have any knowledge of GMC using heavier duty springs as standard springs? I'm debating going with the c20 version of standard to get a more plush ride, since the standard in GMC is heavy duty version according to Eaton springs. Hopefully someone knows about this or have ran across this at some point. Thanks in advance.

Last edited by Simonsays; June 27th, 2023 at 12:01 PM. Reason: Wrong weight listed.
Reply With Quote
  #2  
Old June 27th, 2023, 07:01 AM
Ed Snyder's Avatar
Ed Snyder Ed Snyder is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Medford, Oregon
Truck: 1962, 1967
Posts: 889
Thanks: 0
Thanked 5 Times in 3 Posts
Rep Power: 351
Ed Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura aboutEd Snyder has a spectacular aura about
Default Re: 1966 3/4 ton front coil spring rates.

Quote:
Originally Posted by Simonsays View Post
Looking for some knowledge folks. My 3/4 ton 1966 gmc pick up is getting front end rebuilt. I called eaton springs and was told the stock spring is thier ML 2022 spring which is rated for about 1018 lbs spring rate. Now when compared to the same year chevy c20 version that spring is considered heavy duty for a chevy c20. Same year in c20 the standard spring is listed as ML1766 which is listed at around 790lbs spring rate, this spring is standard for both c10 and c20.

So question, is does anyone have any knowledge of GMC using heavier duty springs as standard springs? I'm debating going with the c20 version of standard to get a more plush ride, since the standard in GMC is heavy duty version according to Eaton springs. Hopefully someone knows about this or have ran across this at some point. Thanks in advance.
Your V6 engine (assuming that's what you have) weighs 200 to 300 pounds more than a Chevy engine. If you go with a lighter duty rated spring, you risk bottoming out the suspension on potholes, speed bumps, etc.
__________________
Ed Snyder
Medford, Oregon
1962 1000 Pickup 401M & Muncie 318 with overdrive
1962 K1000 Suburban 401M & SM420
1967 CM1500 pickup 351E & NP435
Reply With Quote
  #3  
Old June 27th, 2023, 03:47 PM
Simonsays Simonsays is offline
Junior Member
 
Join Date: Apr 2021
Location: Los Angeles california
Truck: 1966 3/4 ton
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 29
Simonsays is on a distinguished road
Default Re: 1966 3/4 ton front coil spring rates.

Quote:
Originally Posted by Ed Snyder View Post
Your V6 engine (assuming that's what you have) weighs 200 to 300 pounds more than a Chevy engine. If you go with a lighter duty rated spring, you risk bottoming out the suspension on potholes, speed bumps, etc.

Have a small block 350 in it now.
Reply With Quote
  #4  
Old June 27th, 2023, 04:32 PM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,783
Thanks: 22
Thanked 6 Times in 5 Posts
Rep Power: 570
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1966 3/4 ton front coil spring rates.

Quote:
Originally Posted by Simonsays View Post
Have a small block 350 in it now.
Oh no!
__________________
Step by steps:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
Reply With Quote
  #5  
Old July 22nd, 2023, 01:12 AM
AZKen's Avatar
AZKen AZKen is offline
-= Dues Paid =-
 
Join Date: Jul 2014
Location: AZ
Truck: 6066GMC
Posts: 1,647
Thanks: 0
Thanked 3 Times in 3 Posts
Rep Power: 527
AZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really niceAZKen is just really nice
Default Re: 1966 3/4 ton front coil spring rates.

Go with the Chevy springs.
Reply With Quote
  #6  
Old July 24th, 2023, 06:46 PM
gmcjuniorvan gmcjuniorvan is offline
Member
 
Join Date: Dec 2018
Location: littlerock,california
Truck: gmc
Posts: 38
Thanks: 0
Thanked 4 Times in 2 Posts
Rep Power: 49
gmcjuniorvan is on a distinguished road
Default Re: 1966 3/4 ton front coil spring rates.

Quote:
Originally Posted by Simonsays View Post
Looking for some knowledge folks. My 3/4 ton 1966 gmc pick up is getting front end rebuilt. I called eaton springs and was told the stock spring is thier ML 2022 spring which is rated for about 1018 lbs spring rate. Now when compared to the same year chevy c20 version that spring is considered heavy duty for a chevy c20. Same year in c20 the standard spring is listed as ML1766 which is listed at around 722lbs spring rate, this spring is standard for both c10 and c20.

So question, is does anyone have any knowledge of GMC using heavier duty springs as standard springs? I'm debating going with the c20 version of standard to get a more plush ride, since the standard in GMC is heavy duty version according to Eaton springs. Hopefully someone knows about this or have ran across this at some point. Thanks in advance.

I think they are using P/N 3817997 std. for the Chevy truck I6 230 63-65, 250 66 and 3817998 HD for the small block V8. GMC used the same springs for their I6 only in 65-66. They change the springs in 67.

The I6 230 and 250 are about 440lbs. The Chevy V8 350, 283, 327 are about 575lbs. GMC 1966 V6 305E-795lbs and V6 351-860lbs. P/N 2436529 std and 2440323 HD. They would be special order.

I would go with the MC2022 spring. The ML1766 iare for the I6.

Now the spring rate (spring deflection rate) for the ML1766 (3817997) is 173 and load rate is 1018lbs. MC2022 (3817998) spring rate 239 and load rate is 1152lbs.

Call again and check, I could be wrong.
Attached Images
File Type: jpg 1966 spring.jpg (1.43 MB, Multiple views, 5 clicks)
Reply With Quote
  #7  
Old July 24th, 2023, 07:03 PM
gmcjuniorvan gmcjuniorvan is offline
Member
 
Join Date: Dec 2018
Location: littlerock,california
Truck: gmc
Posts: 38
Thanks: 0
Thanked 4 Times in 2 Posts
Rep Power: 49
gmcjuniorvan is on a distinguished road
Default Re: 1966 3/4 ton front coil spring rates.

Quote:
Originally Posted by Simonsays View Post
Looking for some knowledge folks. My 3/4 ton 1966 gmc pick up is getting front end rebuilt. I called eaton springs and was told the stock spring is thier ML 2022 spring which is rated for about 1018 lbs spring rate. Now when compared to the same year chevy c20 version that spring is considered heavy duty for a chevy c20. Same year in c20 the standard spring is listed as ML1766 which is listed at around 722lbs spring rate, this spring is standard for both c10 and c20.

So question, is does anyone have any knowledge of GMC using heavier duty springs as standard springs? I'm debating going with the c20 version of standard to get a more plush ride, since the standard in GMC is heavy duty version according to Eaton springs. Hopefully someone knows about this or have ran across this at some point. Thanks in advance.
I think they are using P/N 3817997 std. for the Chevy truck I6 230 63-65, 250 66 and 3817998 HD for the small block V8. GMC used the same springs for their I6 only in 65-66. They change the springs in 67.

The I6 230 and 250 are about 440lbs. The chevy V8 350, 283, 327 are about 575lbs. GMC 1966 V6 305E-795lbs and V6 351-860lbs. P/N 2436529 std and 2440323 HD. They would be special order.

I would go with the MC2022 spring. The ML1766 is for the I6.

Now the spring rate (spring deflection rate) for the ML1766 (3817997) is 173 and load rate is 1018lbs. MC2022 (3817998) spring rate 239 and load rate is 1152lbs.

Call again and check, I could be wrong.

1966
Attached Files
File Type: pdf 1966 spring.pdf (78.2 KB, Multiple views, 8 clicks)
Reply With Quote
  #8  
Old July 29th, 2023, 11:29 PM
Simonsays Simonsays is offline
Junior Member
 
Join Date: Apr 2021
Location: Los Angeles california
Truck: 1966 3/4 ton
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 29
Simonsays is on a distinguished road
Default Re: 1966 3/4 ton front coil spring rates.

Quote:
Originally Posted by gmcjuniorvan View Post
I think they are using P/N 3817997 std. for the Chevy truck I6 230 63-65, 250 66 and 3817998 HD for the small block V8. GMC used the same springs for their I6 only in 65-66. They change the springs in 67.

The I6 230 and 250 are about 440lbs. The chevy V8 350, 283, 327 are about 575lbs. GMC 1966 V6 305E-795lbs and V6 351-860lbs. P/N 2436529 std and 2440323 HD. They would be special order.

I would go with the MC2022 spring. The ML1766 is for the I6.

Now the spring rate (spring deflection rate) for the ML1766 (3817997) is 173 and load rate is 1018lbs. MC2022 (3817998) spring rate 239 and load rate is 1152lbs.

Call again and check, I could be wrong.

1966
Those numbers I got straight from eaton springs. They stated ML1766 is 722lbs spring rate. And ML2022 being heavy duty rated at 1018lbs.

But since I went to the sbc350 I lost about 300 lbs of weight from the original v6 351. It felt very bounce as if the spring was to hard to compress so trying the ML1766 and if that don't work I'll go back to stock.
I'll watch to see if I bottom out with a lower spring rate which hopefully it doesn't happen. Many chevy trucks use the lower spring rate and have swapped in sbc350 and have been fine. I'll report back next week after putting some miles on.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Coil spring help Drewski Wheels, Tires, Suspension and Brakes 0 July 14th, 2016 06:50 AM
Gen/alt; coil spring rating Archiver Previous Forum Posts 3 July 2nd, 2012 02:51 AM
Re: Front spring rates for 62-66 trucks ? Archiver Previous Forum Posts 0 January 29th, 2008 05:56 AM
Front spring rates for 62-66 trucks ? Archiver Previous Forum Posts 0 January 28th, 2008 01:53 AM
front coil springs Archiver Previous Forum Posts 0 August 4th, 2006 03:42 AM


All times are GMT +1. The time now is 12:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 921731597221|1730458924|0