6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Builds and Journals
#Sponsored

Builds and Journals This is where the magic happens. Photograph & document your GMC build progress for posterity.
NOTICE - Photobucket will delete your pics after a time. Use another host if possible.

Reply
 
Thread Tools
  #111  
Old July 28th, 2013, 06:22 AM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,783
Thanks: 22
Thanked 6 Times in 5 Posts
Rep Power: 570
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)

Due to this being a one man and two little kid show I wanted to remove the tailgate to make this thing a little lighter.

I put a 1/2 inch socket on it and spun it.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Put a helper on the other side to catch the fallout. Our helper here lost two more teeth last night. In one night. I said, "Go brush your teeth for bed" last night and she said, "Daddy, I don't have any more teeth!" Har har.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Mine were stuck in this stupid welded-on bumper. I whacked it with a hammer and it gave up pretty quickly.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







After getting both chains off I started on the nut at the bottom of the tailgate.


To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

YOU NEED TO BRACE THE TAILGATE BEFORE DOING THIS.

I thought it was a bolt that ran the length of the tailgate. I was very very wrong. I spun it about a half-second then the entire tailgate fell off into the floor. The Powder Puff was only about 6 inches off to the side.

Here's her reaction right afterward.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







I can't show you mine. I was pretty upset by this hunk of heavy steel almost hitting my kid. I don't swear but I sure had a frowny face on for a while.

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Here's all that holds the tailgate on.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?






After that we moved Cecilia back to the backyard. Actually no, we took a little break to cool off. Then our new neighbors pulled up and what are they towing? No, not a GMC, but a '78 Camaro. My oldest said, "Ooo Daddy, you guys can talk about old junky cars together! You'll be besties!" LOL!
We walked out and shot the bull with them for about 30 mins or so. I'm even more convinced that they're pretty good people now. You can't beat great neighbors. He wants to paint his camaro himself by winter. Maybe I'll get to help and get some tips.

As a side note, if I paint Cecilia it'll be the dead last thing I do. I don't know why everyone wants to hurry to paint. Don't you just scratch it all up while you're working on the rest of it? I don't trust myself that much. I'm sure I'd ruin any paintjob if I wasn't almost all finished before shooting paint.

OK now we moved to the backyard.
Reply With Quote
  #112  
Old July 28th, 2013, 06:33 AM
Vernski's Avatar
Vernski Vernski is offline
Member
 
Join Date: Jan 2013
Location: Rath I
Age: 77
Posts: 97
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 97
Vernski is on a distinguished road
Default Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)

That is a tough job for two grown men no matter how you do it, rusty bolts are the curse of the GMC owner.My sympathy is with your skinned knuckle's that take drive..Vernski

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Reply With Quote
  #113  
Old July 28th, 2013, 06:54 AM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,783
Thanks: 22
Thanked 6 Times in 5 Posts
Rep Power: 570
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)

After driving her to the back we cleaned her bed out.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Removed all of the bolts. Here's a tip - they're all the same. Someone told me they're different lengths. They're not.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Then I placed the first post in the front between the bed and frame. You don't have to lift or anything to get it started. It's already got a void that fits partway in.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







At this point I remembered that there is an electrical junction on the bed by the bumper. DOH! I took that off with a flathead screwdriver.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Then I lifted it up so my helper could shove the board through to the other side. My helper is my oldest daughter this time. She's not strong, she's not tough. She's just a girly girl. If she can do it just about anyone you have hand can probably help just fine.

Pay no mind to that handsome guy in the pic.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







You have to really raise it up high and the bed flexes a lot. It's not very heavy in the front though.

The back is stupid heavy though. I had to crawl under it and push up with my feet (and bad hip) to get it up high enough to slip the posts in.

My oldest was supposed to snap a pic of me pushing the bed up. She just took a pick of what appears to be the old man's butt. Very funny ya punk kid.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







After getting a post under front and back (8 ft uncut) I still couldn't lift it over the bumper's fins in back because it weight about a billion pounds. So we put another block under the front.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







And the back. It looked like this.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







From my perch here I was finally able to lift it up to the top of the bumper fins. It wanted to push me over backward. I have a trailer back there though and used it to step on and brace myself. I recommend you don't do this at all. Get a cherry picker or a forklift and just pull it off. This is VERY DANGEROUS.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







I set it down gently on the fins themselves. This allowed us to move the boards to the front so I could pull it backward some without it falling off of all of the bracing blocks and killing me.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







When I pulled it backward off of the fins the first blocks collapsed. That was OK because it fell on the backups. I had it past the fins anyway at this point so I was golden as far as I was concerned.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Reply With Quote
  #114  
Old July 28th, 2013, 07:09 AM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,783
Thanks: 22
Thanked 6 Times in 5 Posts
Rep Power: 570
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)

My plan was now to tie my braces together and drive forward. That didn't happen, but it sounded like a good plan.

I drilled pilot holes and ran my lag bolts into my boards under the rear.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Then ran it in to secure the post and cross piece.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Next I moved to the front. I picked up the front cross piece to put it on the post. No problem.




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







But then I did the final "foot" on the driver's side front and the entire thing collapsed toward the rear. If it hadn't been for the trailer behind the truck the bed would have fallen to the ground and probably scratched or tore itself up horribly.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







At this point I was too worn out to do anything else. This was a real body killer here. This is what it looks like as I type this, my hands sore and throbbing and my muscles crying for pharmaceuticals. Note the boy making a surprise appearance. He happened to be in the mood to help as we were closing up. Shirtless. "Dis one's for da' way'dees! (ladies)"



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





I'm dead. Tomorrow if I can move I'll go out there again and try to get it up on blocks again and nail a brace between the two posts as originally planned. I'll then pull forward till I get to the front stake pocket, then lift it over the fins as I did the rear. If I'm lucky.

I'll let you know how tomorrow goes.
Reply With Quote
  #115  
Old July 28th, 2013, 11:05 PM
Andice's Avatar
Andice Andice is offline
Senior Member
 
Join Date: Mar 2013
Location: Austin, TX
Truck: 1964 Fenderside 1000
Posts: 158
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 112
Andice is on a distinguished road
Default Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)

I guess that monster of a rear bumper is welded in place, eh? Too bad. I thought I had it tough just trying to lift my bed high enough to clear the upward curvature of the rear frame section - but your bumper "wings" are crazy high. I simply dropped my bed down on the driveway and let it sit on the tailgate. Then I tilted it forward on a sawhorse. Then we slid more support under the rear of the bed. I worried about how I was going to get my bed back on after the truck body was painted. I ended up recruiting some help with the offer of free beer. It worked.
Attached Images
File Type: jpg 201003.jpg (37.1 KB, Multiple views, 20 clicks)
Reply With Quote
  #116  
Old July 29th, 2013, 11:29 PM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,783
Thanks: 22
Thanked 6 Times in 5 Posts
Rep Power: 570
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)

Quote:
That is a tough job for two grown men no matter how you do it, rusty bolts are the curse of the GMC owner.My sympathy is with your skinned knuckle's that take drive..Vernski

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Thanks! I'm hard headed. Sometimes too much

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Quote:
I guess that monster of a rear bumper is welded in place, eh? Too bad. I thought I had it tough just trying to lift my bed high enough to clear the upward curvature of the rear frame section - but your bumper "wings" are crazy high. I simply dropped my bed down on the driveway and let it sit on the tailgate. Then I tilted it forward on a sawhorse. Then we slid more support under the rear of the bed. I worried about how I was going to get my bed back on after the truck body was painted. I ended up recruiting some help with the offer of free beer. It worked.
Yeah, I considered just taking a grinder to the fins and removing them altogether to make things easier but I wasn't sure I could weld them back on in the future. At least not and have them look right.
Your helper there doesn't look like your average "beer for work" buddy

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?


You're a lucky man! My blonde won't even ride in my truck lol.
Reply With Quote
  #117  
Old July 29th, 2013, 11:50 PM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,783
Thanks: 22
Thanked 6 Times in 5 Posts
Rep Power: 570
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)

I went outside on Sunday sore and aching. I surveyed the wreckage.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







The first step was to see if things were stable. I looked underneath and saw it was resting on the trailer's tongue and the tongue spinny thing that runs the front wheel pad up and down. I forget what it's called.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Then it hit me. It's right there halfway on the trailer anyway. The trailer is like 25 feet long. All it has on it now is a spare tarped 305....there's plenty of room!



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?






So I took the tailgate and pieces I had just put on the trailer off and started huffing it backward onto the trailer. My thoughts were that I could easily pick it up off of the trailer, at least easier than off the ground.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







After kinda walking it backward a bit I had to move around over the frame again and push from the front. Then it hit me - O

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

href="http://windypix.com/?pm=RZC9" target="_blank">

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?






Standing on the rear axle gave me an amazing foot cramp! Ha ha you thought I died didn't you? That's why you shouldn't do this. Be smart and get someone to do it for you with heavy equipment.

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



From the front I walked it backward inch by inch, pushing one side then the other like youd do with a fridge.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







The tailgate area finally reached the trailer bed and stuck. So I pulled out my jack and put it under the truck bed to give it wheels to roll better into the trailer.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Eventually I got it walked and rolled to the end of the bed. Whew!



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Reply With Quote
  #118  
Old July 30th, 2013, 12:18 AM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,783
Thanks: 22
Thanked 6 Times in 5 Posts
Rep Power: 570
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)

From here I tried to be a big tough man and lift it up over the fins again to clear the stake posts for the front but there was no way that was happening. I was too sore from yesterday and I'm just not that strong.

Instead I put my spare 4x4 under the bed from here to the trailer's front rail.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Then I made my redhead come out and push the post down to take some of the weight off of me. Her little 90 lb frame wasn't big enough to push it down so she improvised.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







I eventually got it worked around where I could lift it one corner at a time. This let her use her hands (and be more safe with me lifting on it) to help me lever it upward.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







I propped one side on the fins, then the other. It weighed a ton.




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







But finally it was FREE! All that was left was sliding it down the lever onto the trailer.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







This is where she rested when I gave out. And it's where she'll stay for now.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







I heavily recommend you not do this by yourself. Or at all.
I can't say it enough. I had a lot of close calls, pinned feet and legs, and pinched digits. One slip or shift and I could have ended up with broken bones.

So, lesson learned:
  • Truck beds are heavy
  • Sometimes it's good to know people. If you don't know anyone, make your own helpers.
  • There will come a point in your rebuild that you'll realize you didn't get what you thought you did. It's still what you have though. Enjoy it.
Reply With Quote
  #119  
Old July 30th, 2013, 12:29 AM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,783
Thanks: 22
Thanked 6 Times in 5 Posts
Rep Power: 570
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)

I forgot to mention these things. They're little blocks located under the wonky bolts under the bed. You know, the ones that are inside the frame. They go on like this and are metal so they'll get a painting.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Look at how easy access to that rear end is now? I also found some numbers on it after the bed was off. I was looking in the wrong place.

THey're not on the cover at all, they're on the top right side of the axle. It's still a Dana 44

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







To celebrate our little victory and my not losing a limb my redhead sat down and finished our emblems. She said "For $20 bucks each I'd do this all day" so if you guys want 'em done I guess PM me and give her a week. School starts soon and there's alot of touchup.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







The Powder Puff mechanic wanted to whittle. I don't know where she heard it before but I was about her age when my dad taught me. So here she goes. Dull pocket knife and stick in hand.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







And me? Well I got to work putting this together. I wish you guys could smell 'em.

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




Coming up next I'll probably paint some of those supports I took off. Then on the weekend I'll pull a wheel off and see if I need to order brakes along with the rear end seals.
Reply With Quote
  #120  
Old August 11th, 2013, 05:25 AM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,783
Thanks: 22
Thanked 6 Times in 5 Posts
Rep Power: 570
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)

A couple of weekends went by. You'd think nothin happened but it did! I fell into a great 175psi 2 stage 80 gallon 220v Porter Cable compressor!

For FREEEEEEEEEE!!!!

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?


Here it sits next to my 20 gallon noisemaker.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?








I just about had a heart attack. So I rushed out and picked it up. I got it home and put on rubber feet (chopped up old Cecilia tires) in the corner. There it sat all week while I ordered the electrical stuff online. We may as well call this post "How to Wire 220 in your house". Here's my shopping list:
  • 1x 10/2 Romex with ground, 50 ft. (or enough to reach the panel if you have to go that far)
  • 2x 4" square box with 1/2" knockouts ($0.99 ea at lowes)
  • 1x 4" square raise plate single hole cover (for receptacle to poke through)
  • 1x 4" square blank plate (to cover the box that will connect to existing wire. Not req'd if panel wired) ($0.91 at lowes)
  • 6x 2 screw romex connectors
  • 1x NEMA L6-30 30 amp twist lock plug (also called a wire cap)
  • 1x NEMA L6-30R twist lock receptacle
  • 8x Big Gray Wire Nuts
  • 1x 8 ft. Gray Electric grade PVC Pipe ($1.99 at Lowes)
  • 1x Gray Pipe 90 Degree Bend with 1/2 inch knockout sized socket (to fit in 4" square box) ($2.64 at Lowes)
  • 4x 3/4" One Hole Straps (for holding the wire to the wall) ($0.98 bag of 4 at Lowes)
  • 1x 3/4 inch hydraulic hose 4ft long with connectors (Tractor Supply or auto store)
  • 1x Electrical Hotstick. I got this

    To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

    .

I still dont have a few of the cover plates but everything else is here. I was anxious to get started so I got my stuff laid out. I began by putting my boxes together. I knocked out a left, right, and top hole one one box. Then I knocked out only one side hole on the other. Here's how that's done.

Knock on the hole with a hammer or hammer and screwdriver until it's slightly bent.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Then grab it with your pliers. Wiggle it back and forth till it comes free.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Now put your Romex connector in the hole and tighten it down.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Repeat this for every one of the three holes in the box that'll go in the attic. For the box that will be by your compressor (or whatever you're running) you can put the gray 90 degree connector in it if you want but we'll take it back out later. Here's what it kinda will look like.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Now grab your NEMA plug and the cable coming from your compressor. Mine came with bare wires snipped off. Take the two big screws off of your plug and set the screws and plastic clamps aside. Now poke your cable through the back of the plug. It has a rubber surround that might make this difficult to push but I got it. So can you.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Strip the wires about 1/4 inch on the ends then poke them into the plug. The black wire goes in the gold screw's slot, the white, yellow, or red (not all three!) will go in the silver screw's slot. The bare or green wire goes in the green screw's slot.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

__________________
Step by steps:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
Reply With Quote
Reply

Bookmarks

Tags
305 v6, 4 wheel drive, 4x4


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: [6066 GMC] So Slow........ Archiver Previous Forum Posts 0 January 29th, 2006 01:53 AM
So Slow........ Archiver Previous Forum Posts 0 January 28th, 2006 01:57 AM
Re: [6066 GMC] So Slow........ Archiver Previous Forum Posts 0 January 28th, 2006 01:29 AM
Re: [6066 GMC] So Slow........ Archiver Previous Forum Posts 0 January 28th, 2006 01:29 AM
slow starts Archiver Previous Forum Posts 0 August 5th, 2002 03:36 PM


All times are GMT +1. The time now is 09:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 911731788713|1730579948|0