6066 (1960-1966) GMC Truck Club Bitcoin now accepted here! 
Pay Dues
Pay Dues or become a Site Supporter
 



Go Back   6066 (1960-1966) GMC Truck Club > 6066 GMC Truck Club Forum > Builds and Journals
#Sponsored

Builds and Journals This is where the magic happens. Photograph & document your GMC build progress for posterity.
NOTICE - Photobucket will delete your pics after a time. Use another host if possible.

Reply
 
Thread Tools
  #11  
Old June 13th, 2014, 03:29 AM
Crosshairs6 Crosshairs6 is offline
-= Site Supporter =-
 
Join Date: Jun 2014
Location: Pollock, Louisiana
Truck: 1961 GMC 4000 (Fontaine flatbed) w/ 305B engine
Posts: 53
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 79
Crosshairs6 is on a distinguished road
Default Re: 1961 GMC 4000 Rescue and repair

I pulled off the gasoline fuel lines starting from the tank behind the seat to the carburetor. The steel fuel lines I have cleaned and look pretty good. The rubber fuel line with 3/8" fittings that runs over the frame rail under the cab has to be replaced. I ordered that section of the fuel line from NAPA and will pick it up tomorrow with the fuel tank from the radiator shop. I will also pickup the grommet that wraps around the fuel tank fill spout that comes out next to the drivers side door. That had to be delivered from the east coast according to parts GURU'S at NAPA. She is coming together with parts so hopefully I will get the chance to start her this weekend.

After I get her running, then stripping all the wood off the bed then working on the brakes. Stripping the wood will make it easier if I have to change out the brake lines. Speaking of brakes, has anyone upgraded a truck like this to all around disk brakes? If so, where do you buy the kit to do that? As much as I want her to run, I want this huge girl to STOP! I will post more pictures tomorrow. Thanks for all the comments. I have received some good information since I started this project.
__________________
USMC Retired
Pollock, LA.

Own a 1961 GMC 4000 (Fontaine Flatbed) with a 305B engine
Reply With Quote
  #12  
Old June 13th, 2014, 04:22 AM
Cayoterun's Avatar
Cayoterun Cayoterun is offline
Senior Member
 
Join Date: Jan 2013
Location: Guymon, Ok.
Truck: GMC V12 powered '46 Chevy pu
Age: 84
Posts: 167
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 117
Cayoterun is on a distinguished road
Default Re: 1961 GMC 4000 Rescue and repair

Don't overlook the obvious when you reinstall the gas carb. Eliminate the off/on gas line solenoid. Without hot wire activated, it stays in the off position. Back to gas all the time, it no longer serves any purpose.

Cayoterun
__________________
Cayoterun
Okla Panhandle

I think I'll fix it myself, and pay the extra $500.
Reply With Quote
  #13  
Old June 14th, 2014, 09:37 PM
Crosshairs6 Crosshairs6 is offline
-= Site Supporter =-
 
Join Date: Jun 2014
Location: Pollock, Louisiana
Truck: 1961 GMC 4000 (Fontaine flatbed) w/ 305B engine
Posts: 53
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 79
Crosshairs6 is on a distinguished road
Default Re: 1961 GMC 4000 Rescue and repair

Went to pickup the gas tank that had been soaking in a chemical bath since Monday. The only thing keeping that tank from leaking was the sludge in the tank. After the bath, the tank had about 15 holes in it.

Obviously there will be no starting of the truck this weekend.

So I got online and found a brand new replacement tank with a sending unit and should have them here by Thursday of next week. The tank is also lined so I should not have any problems. I will shoot pictures when the new tank is delivered new week.
__________________
USMC Retired
Pollock, LA.

Own a 1961 GMC 4000 (Fontaine Flatbed) with a 305B engine
Reply With Quote
  #14  
Old June 21st, 2014, 03:38 AM
Crosshairs6 Crosshairs6 is offline
-= Site Supporter =-
 
Join Date: Jun 2014
Location: Pollock, Louisiana
Truck: 1961 GMC 4000 (Fontaine flatbed) w/ 305B engine
Posts: 53
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 79
Crosshairs6 is on a distinguished road
Default Re: 1961 GMC 4000 Rescue and repair

New tank arrived with sending unit and stainless steel screws. I checked over the tank for any issues and it all looked good. Packaging was really good. The sending unit with screws came in a separate box.

Here is a picture of the tank. Do not forget to place the gasket first before installing the sending unit. Install the float first when installing the sending unit. I laid the tank down on a piece of the notched packing cardboard to hold the tank steady and let the sending unit hang freely in the tank while I tightened the screws on the sending unit.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

,

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

,

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

__________________
USMC Retired
Pollock, LA.

Own a 1961 GMC 4000 (Fontaine Flatbed) with a 305B engine
Reply With Quote
  #15  
Old June 21st, 2014, 03:44 AM
Crosshairs6 Crosshairs6 is offline
-= Site Supporter =-
 
Join Date: Jun 2014
Location: Pollock, Louisiana
Truck: 1961 GMC 4000 (Fontaine flatbed) w/ 305B engine
Posts: 53
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 79
Crosshairs6 is on a distinguished road
Default Re: 1961 GMC 4000 Rescue and repair

Next I cut some cardboard strip from the fuel tank packing to run under the straps that hold the fuel tank in place. It all went together pretty easy. Remember that the fuel tank neck extension that comes out next to the drivers side door has to be installed.
I strapped the tank down the same as it was removed. Tank fit perfectly. I connected the power wire to the connection by the drivers side door and the ground wire to the cab over the tank.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

,

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

,

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

__________________
USMC Retired
Pollock, LA.

Own a 1961 GMC 4000 (Fontaine Flatbed) with a 305B engine
Reply With Quote
  #16  
Old June 21st, 2014, 03:51 AM
Crosshairs6 Crosshairs6 is offline
-= Site Supporter =-
 
Join Date: Jun 2014
Location: Pollock, Louisiana
Truck: 1961 GMC 4000 (Fontaine flatbed) w/ 305B engine
Posts: 53
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 79
Crosshairs6 is on a distinguished road
Default Re: 1961 GMC 4000 Rescue and repair

Tomorrow I will install the steel fuel lines with new fuel filter. I have the fuel filter canister soaking in diesel. All will be cleaned up good and I will finish the fuel system overhaul. I have new plug wires and a new coil as well. With any luck, I will have the old girl running tomorrow.

Many thanks to Cayoterun for locating me a breather (air cleaner) for the truck. I received a message this evening that he shipped the breathers (2 air cleaners) out to me today. One is and oil bath type and the other is a filter type. When I removed the propane system from the truck, the air cleaner was part of the propane assembly.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

__________________
USMC Retired
Pollock, LA.

Own a 1961 GMC 4000 (Fontaine Flatbed) with a 305B engine

Last edited by Crosshairs6; June 21st, 2014 at 03:55 AM. Reason: attached picture
Reply With Quote
  #17  
Old June 21st, 2014, 05:58 AM
FetchMeAPepsi's Avatar
FetchMeAPepsi FetchMeAPepsi is offline
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Edmond, Ks
Truck: 1962 4x4 GMC CECILIA
Posts: 1,779
Thanks: 19
Thanked 4 Times in 3 Posts
Rep Power: 569
FetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of lightFetchMeAPepsi is a glorious beacon of light
Default Re: 1961 GMC 4000 Rescue and repair

Those oil bath cleaners are awesome. I have a paper and an oil, and the paper sits in the cabinet collecting dust while the oil...oh wait. I guess they both collect dust

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?


Anyway, the fact that I never have to spend another $15.00 on a piece of paper really makes me happy.

Can't wait to see you driving!

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

__________________
Step by steps:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
Reply With Quote
  #18  
Old June 21st, 2014, 04:14 PM
GMCNUT's Avatar
GMCNUT GMCNUT is offline
-= Site Supporter =-
 
Join Date: Jan 2013
Location: Arab Alabama
Truck: 60 1001 Wideside Custom BBW, 62 K1001 Wideside BBW and 1966 1001 Wideside BBW w/ Sport Trim option
Posts: 689
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 257
GMCNUT will become famous soon enoughGMCNUT will become famous soon enough
Default Re: 1961 GMC 4000 Rescue and repair

man o man - what part of the United States do you have to live in to see something this cool and solid just sitting by the road....geez

PS - top money will be paid to anyone who can turn me onto a set of 60-63 solid doors like this truck has

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

__________________
My 60-66 GMC Projects:

1960 1001 Custom Cab short wideside BBW, 305A V6, factory PB, Hood Jet, Radio and Hydramatic.

1962 K1000 4x4 short wideside, BBW, 305D w/ SM420, PTO Winch

1966 1001 Custom Cab short wideside, w/ super rare Sport Trim option interior (bucket seats)
Reply With Quote
  #19  
Old June 24th, 2014, 05:50 AM
Crosshairs6 Crosshairs6 is offline
-= Site Supporter =-
 
Join Date: Jun 2014
Location: Pollock, Louisiana
Truck: 1961 GMC 4000 (Fontaine flatbed) w/ 305B engine
Posts: 53
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 79
Crosshairs6 is on a distinguished road
Default Re: 1961 GMC 4000 Rescue and repair

GMC Nut,
I will look for you a set of doors like what is on my truck. I may know where to find them.
__________________
USMC Retired
Pollock, LA.

Own a 1961 GMC 4000 (Fontaine Flatbed) with a 305B engine
Reply With Quote
  #20  
Old June 24th, 2014, 06:08 AM
Crosshairs6 Crosshairs6 is offline
-= Site Supporter =-
 
Join Date: Jun 2014
Location: Pollock, Louisiana
Truck: 1961 GMC 4000 (Fontaine flatbed) w/ 305B engine
Posts: 53
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 79
Crosshairs6 is on a distinguished road
Default Re: 1961 GMC 4000 Rescue and repair

I have the entire fuel system back in the truck and fuel is running great to the carburetor. I put 5 gallons of fuel in the tank. No leaks anywhere with the fuel lines and the gas gauge is working perfectly. I put the new plug wires and coil on today which I purchased from NAPA. I cleaned out the ignition wiring connector on the firewall with compressed air and contact cleaner after using a wire brush on the contacts. I traced the wires from the distributor and all connections look good.
I replaced the battery terminal connectors as well. I tried to start the truck this evening and I am not getting any spark at all. I assume it's the distributor (points) that are bad. I have been reading some of the posts from "Ray" regarding troubleshooting the ignition. I will try this again tomorrow. I do believe I will upgrade the points to the Pertronix ignition setup. I have also talked to Cayoterun regarding this upgrade. I would like to get the truck running with what I have now if possible. I will know more after tomorrow.

I also need to do a compression test on the engine. That is a gauge I do NOT have so I will be looking for that as well tomorrow.

Thanks for all the messages I received regarding the truck. It is just a matter if time before I have her back on the road. Thanks to all the experts on this site whose posts I have read to get me this far. More to follow!
__________________
USMC Retired
Pollock, LA.

Own a 1961 GMC 4000 (Fontaine Flatbed) with a 305B engine
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: [6066 GMC] 1961 4000 Archiver Previous Forum Posts 0 September 25th, 2008 01:10 AM
Re: [6066 GMC] 1961 4000 Archiver Previous Forum Posts 0 September 24th, 2008 01:51 AM
Re: [6066 GMC] 1961 4000 Archiver Previous Forum Posts 0 September 24th, 2008 01:51 AM
Re: [6066 GMC] 1961 4000 Archiver Previous Forum Posts 0 September 24th, 2008 01:06 AM
Re: [6066 GMC] 1961 4000 Archiver Previous Forum Posts 0 September 24th, 2008 01:00 AM


All times are GMT +1. The time now is 12:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd 841730414881|1729207167|0